Always the right temperature

The right temperature can be set quickly and simply thanks to the temperature control device.

Always the right size

Containers with unusual shapes can be heated with a custom-made heater.

IBC/A - Container Base Heater (up to 150 °C)

The IBC/A-Container Base Heater is a simple yet effective tool to warm up 1000-liter containers.

  • silicone material
  • even heat distribution
  • 2 meters connecting cable
  • moisture- and chemical-resistant
  • built-in circuit breaker
  • PTC temperature sensor
  • bespoke sizes possible
  • electronic control from 0 to 150 °C
  • standard for 1000-liter-containers
  • short delivery time
IBC/A - Container Base Heater

more information

IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used.

The IBC/A heating system consists of a resistance wire, which is laminated between two silicone/fibreglass mats. A PTC resistor integrated into the mat is used as a temperature sensor for the electronic control and ensures a fast response time to temperature changes at the bottom of the container. Due to its high power density the heater mat is ideally suited for products with large energy needs. It is to be used because of its fast response and especially on temperature-sensitive materials.

max. temperature 150 °C
Outer material Silicone
Insulation material none
Protection class II
Cable length 2 meters
Fastening -
Control electronic control
Control range 0 - 150 °C
Heating zones 1
Special sizes possible yes
Container size Power at 230 V Length Width Part-No.
1000 liters 2700 W 1035 mm 850 mm 387K.004

All IBC/A-Container Base Heaters correspond to the EMV low-voltage guideline valid within the EC and are marked accordingly with the CE sign.

The electricity supply should be separated from the container heater if the container is empty, during the filling process, or during installation and disassembly of the heater itself. The device should only be used in dry surroundings and with a ventilated container to avoid pressure building up inside the container.

IBC/Bpro - Container Jacket Heater (up to 90 °C)

The IBC/Bpro container jacket heater is a simple yet effective tool for the warming up of 1000 L containers.

IBC/Bpro - Container Jacket Heater
  • silicone - coated fibreglass
  • heat insulating
  • adaptable with quick-release buckles
  • 4 meters connecting cable
  • double circuit
  • IP40 protection
  • bespoke sizes possible
  • thermostat adjustable from 0 to 40 °C or from 0 to 90 °C
  • available from stock

more information

The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time.

The heating cables of the IBC/Bpro heaters are sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. An optimal contact with the container as well as a quick assembly and dismantling are achieved by the use of quick-release buckles. The heater has two separate heating circuits (top and bottom). Each heating circuit is controlled by an integrated capillary pipe thermostat.

max. temperature insulation 90 °C
Outer material Silicone - coated fibreglass
Insulation material Fibreglass
Protection class II
Cable length 4 meters
Fastening Quick-release buckles
Control 2 Capillary pipe thermostat
Control range 0 - 90 °C (or -5 - 40 °C)
Heating zones 2
Special sizes possible yes
Container size Power at 230 V Length Width Part-No.
1000 liters 2 x 1000 W 4400 mm 1000 mm 387E.001
Heat up time 1000 l container with water by IBC/B - 2 x 1000W incl. HILC Heat up time 1000 l container with water by IBC/B - 2 x 1000W incl. HILC

All IBC/Bpro-Container Jacket Heater correspond to the EMV low-voltage guideline valid within the EC and are marked accordingly with the CE sign.

The electricity supply should be separated from the container heater if the container is empty, during the filling process, or during installation and disassembly of the heater itself. The device should only be used in dry surroundings and with a ventilated container to avoid pressure building up inside the container.

IBC/B - Container Jacket Heater (up to 90 °C)

The IBC/B container jacket heater is a simple yet effective tool for the warming up of 1000 L containers.

IBC/B - Container Jacket Heater
  • polyurethane-coated polyester
  • heat insulating
  • adaptable with quick-release buckles
  • 4 meters connecting cable
  • double circuit
  • IP40 protection
  • bespoke sizes possible
  • thermostat adjustable from 0 to 40 °C or from 0 to 90 °C
  • available from stock

more information

The IBC/B-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time.

The heating cables of the IBC/B heaters are sewn in water repellent Teflon-coated polyester. The outer thermal insulation is achieved through a binder-free mat made of textile glass and a water repellent polyurethane-coated polyester. An optimal contact with the container as well as a quick assembly and dismantling are achieved by the use of quick-release buckles. The heater has two separate heating circuits (top and bottom). Each heating circuit is controlled by an integrated capillary pipe thermostat.

max. temperature insulation 90 °C
Outer material Flame retardant waterproof polyurethane-coated polyester
Insulation material Fibreglass
Protection class II
Cable length 4 meters
Fastening Quick-release buckles
Control 2 Capillary pipe thermostat
Control range 0 - 90 °C (or -5 - 40 °C)
Heating zones 2
Special sizes possible yes
Container size Power at 230 V Length Width Part-No.
1000 liters 2 x 1000 W 4400 mm 1000 mm 387K.003
Heat up time 1000 l container with water by IBC/B - 2 x 1000W incl. HILC Heat up time 1000 l container with water by IBC/B - 2 x 1000W incl. HILC

All IBC/B-Container Jacket Heater correspond to the EMV low-voltage guideline valid within the EC and are marked accordingly with the CE sign.

The electricity supply should be separated from the container heater if the container is empty, during the filling process, or during installation and disassembly of the heater itself. The device should only be used in dry surroundings and with a ventilated container to avoid pressure building up inside the container.

More information

Pursuant to § 5 TMG (German Tele-Media Act):

Friedr. Freek GmbH

Sudetenstraße 9
D-58708 Menden / Germany

Postfach 2210
D-58682 Menden / Germany

Telephone: +49 2373 9590-0
Fax: +49 2373 9590-30

E-Mail:
Internet: www.freek-heaters.com

VAT-ID:

DE125576365

District Court:

Arnsberg HRB 4672

Managing Directors:

Wolfgang Kaiser
Stefan Kaiser

Bank accounts:

Märkische Bank:
BLZ: 450 600 09
Kto: 106 239 300
BIC Code: GENODEM1HGN
IBAN: DE57 4506 0009 0106 2393 00

Sparkasse Märkisches Sauerland Hemer-Menden:
BLZ: 445 512 10
Kto: 1 800 020 701
BIC Code: WELADED1HEM
IBAN: DE26 4455 1210 1800 0207 01

Responsible regarding the contents of this site:

Stefan Kaiser
in Friedr. Freek GmbH
58708 Menden
Telephone: +49 2373 9590-0

GResponsible regarding layout and programming of this site:

Rafael Einhaus
in Friedr. Freek GmbH
58708 Menden
Telephone: +49 2373 9590-29

Information regarding liability:

Liability for Content

We make every effort to keep the information on our Web site current, but accept no liability whatsoever for the content provided. Pursuant to § 7 par. 1 of TMG (German Tele-Media Act), the law limits our responsibility as a service provider to our own content on these Web pages. According to §§ 8 to 10 of TMG, we are not obligated to monitor third party information provided or stored on our Web site. However, we shall promptly remove any content upon becoming aware that it violates the law. Our liability in such an instance shall commence at the time we become aware of the respective violation.

Liability for Links

Our site contains links to third-party Web sites. We have no influence whatsoever on the information on these Web sites and accept no guaranty for its correctness. The content of such third-party sites is the responsibility of the respective owners/providers. At the time third-party Web sites were linked to ours, we found no grounds whatsover of any likely contravention of the law. We shall promptly delete a link upon becoming aware that it violates the law.

Copyrights

The content and works provided on these Web pages are governed by the copyright laws of Germany. Duplication, processing, distribution, or any form of commercialization of such material beyond the scope of the copyright law shall require the prior written consent of its respective author or creator.

Data Protection

Please be aware that there are inherent security risks in transmitting data, such as e-mails, via the Internet, because it is impossible to safeguard completely against unauthorized access by third parties. Nevertheless, we shall safeguard your data, subject to this limitation.

In particular, personal information will be transmitted via the Internet only if it does not infringe upon third-party rights, unless the respective party has given its prior consent in view of such security risks. Accordingly, as the Web site provider, we shall not be held liable for any damages incurred as a consequence of such security risks or for any related acts of omission on our part.

We oppose the use of any available contact information by a third party for sending unsolicited advertisements. As the Web site provider, we reserve the express right to take legal action against unsolicited mailing or e-mailing of spam and other similar advertising materials.

Use of Google Analytics

This website uses Google Analytics, a web analytics service provided by Google, Inc. ("Google"). Google Analytics uses "cookies", which are text files placed on your computer, to help the website analyze how users use the site.

The information generated by the cookie about your use of the website (including your IP address) will be transmitted to and stored by Google on servers in the United States. Google will use this information for the purpose of evaluating your use of the website, compiling reports on website activity for website operators and providing other services relating to website activity and internet usage. Google may also transfer this information to third parties where required to do so by law, or where such third parties process the information on Google's behalf. Google will not associate your IP address with any other data held by Google.

You may refuse the use of cookies by selecting the appropriate settings on your browser, however please note that if you do this you may not be able to use the full functionality of this website. By using this website, you consent to the processing of data about you by Google in the manner and for the purposes set out above. More information on Google analytics opt-out.